Description
YRC now offers a performance endplate design to improve the downforce and overall efficiency of the popular WingLogic Airfoil. Endplates are also available in 5 powder coating options: raw aluminum, wrinkle black, matte black, gloss black and gloss white. Made from lightweight .063/.080 5052 aluminum, our CFD-tested endplates are designed to improve the performance of your existing airfoil. Available in both low drag and high downforce configurations, they work to improve the efficiency of your wing by decreasing the strength of the tip vortices. These areas of turbulence are present at the outer edges of all motorsport wings and are the result of the mixing of the high pressure air above and the low pressure air below. When these areas clash directly, it can lead to additional form drag caused by the large size of the vortex/turbulence bubble. Adding pressure relief slots above the wing allows these two pressure zones to equalize more gradually, reducing the size of the wingtip vortices and the corresponding drag. Additionally, reducing the size and intensity of the wingtip vortices allows the underwing vortices to be stronger, drawing more air beneath the more powerful low-pressure side of the wing. Finally, the addition of kicked lower flaps enlarges the volume of low pressure flow beneath the wing. Includes 4 black M6 buttonhead hex screws for mounting to airfoil tapped ends. Please allow 2 weeks for laser cutting, fabrication and coating + 3-5 days for Domestic UPS Ground shipments.
